Midland-radio UHF HANDHELD TRANSCEIVER 70-440BP Manuel d'utilisateur télécharger pdf (Page 21)

70-440 User manual

Page.

Quick reference

Operation reference

1) Output Power: Press the “FUNC” key to set High or Low Power output. “LOW” icon is displayed to

show that you set Low Power output. (high output has no indication)

2) Group Mode: Press the “MON” button to enable/disable GROUP MODE. “SAT” icon is displayed.

3) Squelch: Press and Hold “MON” button to enable/disable the squelch.

4) Scan: Press the “CALL” button + the key to enter the SCAN.

5) Scan List: Press the “CALL” button + “MON” key to change the channel in the scan list. The “•”icon

will be displayed if the channel is in the scan list.

6) Priority: Press the “CALL” button + the key to activate the programmed priority channel. A

“P” icon will be displayed.

7) Lock: Press the “FUNC” + the keys to lock/unlock the radio. Only “PTT” button will function

when the unit is locked (VOX is disabled).

8) “VOX” Press the “FUNC” + the keys while turning on the radio to enable/disable “VOX”.

“VOX” icon will be displayed. (“PTT” button is disabled)

9) When “VOX” function is enabled, Press the “FUNC” + the key to set HIGH or LOW “VOX”

sensitivity. VOX icon blinks to show LOW sensitivity.

10) Press the “CALL” Button for about 2 seconds to send an alert with a ringer type tone to all the users

in the fleet. (ringer will also be heard from the speaker when activated)

11) Press the “FUNC” + “CALL” keys to enable / disable roger beep at the end of the transmission.

12) Press “FUNC” + “MON” keys to enable/disable key beep.

, Press the “FUNC” + the key and switch on the unit. UP will be displayed and unit enters

the PROGRAMMING MODE. This operation is only allowed to authorized person.

1 2 ... 16 17 18 19 20 21 22 23 24

Pas de commentaire

Midland-radio UHF HANDHELD TRANSCEIVER 70-440BP Manuel d'utilisateur Page 21